The MINI-Z RWD series combines a Syncro KT-531P transmitter with a rear-drive chassis that emphasizes running .
The MINI-Z Racer has become a well-established R/C model that anyone can easily get started with using just 8 AAA batteries. Among them, the Mini-Z Racer Sport MR-03 Readyset, which was released in 2013, has been renewed under the concept of "making it easier for a wider range of users to enjoy". It has been reborn as the "MINI-Z RWD Series", which includes a newly developed transmitter and a body full of scale that realistically reproduces popular models. The biggest topic is the adoption of the new Syncro KT-531P transmitter. In addition to the steering trim and throttle trim, it is equipped with a dual rate and LED control function, and the steering wheel is equipped with a sponge as standard to emphasize the fit during control. Also included is a factory-completed body that will satisfy the joy of decorating with a finish similar to that of a display model. Since the chassis also follows the proven MR-03, not only the driving performance but also the durability and reliability are guaranteed. In addition, by adopting a new board with a completely renewed control program, we have achieved linear handling for steering, and the behavior when installing the optional gyro unit (MZW446) has become more controllable characteristics. increase. This is the perfect package for your "first R/C car", so why not start your R/C life with this series?
*Since the Syncro KT-531P transmitter uses FHSS2.4GHz, it is not compatible with conventional ASF/MHS/FHS2.4GHz systems.
- A new series that uses the newly developed Syncro KT-531P transmitter that can be used in various sets.
- Steering feel is dramatically improved by adopting a new board with a completely new control program.
- The factory-assembled body has a high-scale finish that rivals the display model.
- Full bearing specification that adopted a total of 7 ball bearings, which were previously optional.
- Can be installed on all Mini-Z Racer bodies. * Separate motor case and differential gear assembly required for mounting body.
- Adopted original front suspension "VCS" that brings out the optimum camber change according to the suspension stroke.
- Optional gyro unit (MZW446) can be installed. The effect of the gyro unit can be adjusted with the volume installed on the vehicle body (*When using the separately sold KT-432PT transmitter, it can be adjusted with the transmitter).
A race model based on the American Chevrolet high-performance road car. The midship-mounted 5.5-liter V8 engine produces 500 horsepower, and the weight reduction and the installation of aero parts greatly exceed the performance of the commercial model.
Features
- A Syncro KT-531P transmitter with a stylish design is included. In addition to the steering/throttle trim, it is also equipped with a dual rate that can adjust the amount of steering angle and an LED control function. In addition, it is possible to set a training mode that suppresses the vehicle speed (it is set to training mode at the time of shipment).
- Since the chassis follows the proven MR-03, it is possible to install a wide variety of MR-03 chassis parts and a gyro unit (MZW446) that enhances controllability.
- Both narrow and wide tread can be changed by replacing the front lower & upper plate and steering tie rod. In addition, it is also possible to change the wheelbase according to the vehicle model (* optional parts sold separately are required for change).
- With a rich lineup of optional parts for MR-03, you can step up according to your budget and level.
Contents
- Factory-assembled chassis
- Factory-assembled plastic body with painting and markings
- Syncro KT-531P 2.4GHz transmitter
- Parts for changing front tread
- Front suspension spacers for adjustment
- 6T/7T/8T/9T pinion gears
- Wheels
- Wrench
- Pinion removal tool
- Spare wheel nut
- Pairing stick
- Tire and wheel included
Requires
- 4 AAA alkaline batteries for driving
- 4 AAA alkaline or Ni-MH batteries for transmitter
SKU | KYO-32342Y |
Barcode # | 4548565446438 |
Brand | Kyosho |
Help other RC Hobbyland users shop smarter by writing reviews for products you have purchased.
Write A ReviewKyosho MINI-Z RWD MR-03 Readyset Chevrolet Corvette C8.R Gunmetal [32342Y]
or payments of $0.00 with Info
The MINI-Z RWD series combines a Syncro KT-531P transmitter with a rear-drive chassis that emphasizes running .
The MINI-Z Racer has become a well-established R/C model that anyone can easily get started with using just 8 AAA batteries. Among them, the Mini-Z Racer Sport MR-03 Readyset, which was released in 2013, has been renewed under the concept of "making it easier for a wider range of users to enjoy". It has been reborn as the "MINI-Z RWD Series", which includes a newly developed transmitter and a body full of scale that realistically reproduces popular models. The biggest topic is the adoption of the new Syncro KT-531P transmitter. In addition to the steering trim and throttle trim, it is equipped with a dual rate and LED control function, and the steering wheel is equipped with a sponge as standard to emphasize the fit during control. Also included is a factory-completed body that will satisfy the joy of decorating with a finish similar to that of a display model. Since the chassis also follows the proven MR-03, not only the driving performance but also the durability and reliability are guaranteed. In addition, by adopting a new board with a completely renewed control program, we have achieved linear handling for steering, and the behavior when installing the optional gyro unit (MZW446) has become more controllable characteristics. increase. This is the perfect package for your "first R/C car", so why not start your R/C life with this series?
*Since the Syncro KT-531P transmitter uses FHSS2.4GHz, it is not compatible with conventional ASF/MHS/FHS2.4GHz systems.
- A new series that uses the newly developed Syncro KT-531P transmitter that can be used in various sets.
- Steering feel is dramatically improved by adopting a new board with a completely new control program.
- The factory-assembled body has a high-scale finish that rivals the display model.
- Full bearing specification that adopted a total of 7 ball bearings, which were previously optional.
- Can be installed on all Mini-Z Racer bodies. * Separate motor case and differential gear assembly required for mounting body.
- Adopted original front suspension "VCS" that brings out the optimum camber change according to the suspension stroke.
- Optional gyro unit (MZW446) can be installed. The effect of the gyro unit can be adjusted with the volume installed on the vehicle body (*When using the separately sold KT-432PT transmitter, it can be adjusted with the transmitter).
A race model based on the American Chevrolet high-performance road car. The midship-mounted 5.5-liter V8 engine produces 500 horsepower, and the weight reduction and the installation of aero parts greatly exceed the performance of the commercial model.
Features
- A Syncro KT-531P transmitter with a stylish design is included. In addition to the steering/throttle trim, it is also equipped with a dual rate that can adjust the amount of steering angle and an LED control function. In addition, it is possible to set a training mode that suppresses the vehicle speed (it is set to training mode at the time of shipment).
- Since the chassis follows the proven MR-03, it is possible to install a wide variety of MR-03 chassis parts and a gyro unit (MZW446) that enhances controllability.
- Both narrow and wide tread can be changed by replacing the front lower & upper plate and steering tie rod. In addition, it is also possible to change the wheelbase according to the vehicle model (* optional parts sold separately are required for change).
- With a rich lineup of optional parts for MR-03, you can step up according to your budget and level.
Contents
- Factory-assembled chassis
- Factory-assembled plastic body with painting and markings
- Syncro KT-531P 2.4GHz transmitter
- Parts for changing front tread
- Front suspension spacers for adjustment
- 6T/7T/8T/9T pinion gears
- Wheels
- Wrench
- Pinion removal tool
- Spare wheel nut
- Pairing stick
- Tire and wheel included
Requires
- 4 AAA alkaline batteries for driving
- 4 AAA alkaline or Ni-MH batteries for transmitter
SKU | KYO-32342Y |
Barcode # | 4548565446438 |
Brand | Kyosho |
Help other RC Hobbyland users shop smarter by writing reviews for products you have purchased.
Write A ReviewIn Stock
Stock Located at Warehouse may require an additional 1-3 business days processing time before being dispatched. We aim to ensure that you receive your orders as quickly as possible.
Out of Stock
$0.00
-
Body Shells
(22)
-
Buggy
(1)
-
Drift & Road Cars
(21)
-
Chassis
(223)
-
Body Mounts
(48)
-
Bulkheads
(22)
-
Bumpers
(61)
-
Diff/ Gearbox Cases
(22)
-
Rails
(1)
-
Rails/ Plates
(31)
-
Rear Hubs
(22)
-
Roll Cage
(8)
-
Shock Tower
(8)
-
Drivetrain
(187)
-
Brakes
(17)
-
Differential Parts
(24)
-
Pinion Gears
(86)
-
Slipper Clutches
(4)
-
Spur Gears
(45)
-
Wheel Axels
(11)
-
Engine Parts
(102)
-
Air Filter
(2)
-
Carburetors
(5)
-
Clutches
(43)
-
Cylinder Heads
(11)
-
Exhausts
(24)
-
Fuel Tanks & Tubing
(14)
-
Gaskets
(2)
-
Pull Starts & Starters
(1)
-
Hardware
(22)
-
Washers, Spacers & O-Rings
(22)
-
Hpi Racing
(2)
-
Buggy
(1)
-
Cars
(1)
-
Kits
(45)
-
Kyosho
(45)
-
Motorcycles
(1)
-
Suzuki
(1)
-
Oils and Lubricants
(1)
-
Shock Oils
(1)
-
Prime Movers
(4)
-
RC Trucks RTR
(4)
-
Radio Sets
(2)
-
Transmitter Surface & Air
(2)
-
RC Racing
(14)
-
Racer Car Kits - Offroad
(12)
-
Racer's General Accssories
(2)
-
Suspension
(165)
-
Hub Carriers
(54)
-
Linkages
(39)
-
Rod Ends
(7)
-
Suspension Arms
(40)
-
Sway Bars
(19)
-
Turnbuckles
(6)
-
Wheels & Tyres
(5)
-
Short Course
(5)